Cat5 or Cat6 – Which is the Best for Your Data Cabling Installation?

Internet network installation can be a daunting process, especially if you’re a business that relies heavily on data transfer and networking.

We know that Ethernet cables aren’t the most exciting topic to research, and it’s all too easy to get tangled up in all the technical jargon about performance and specifications, but it’s important to be well informed on the differences between Cat5 and Cat6 cabling. 

Not understanding the difference may have an impact on your business, costing you time and money. 

That’s why our experts have put together this concise guide to help you to make the best decision for your business. 


Cat5 & Cat6 Ethernet cables are used for computer networks, connecting your computer to your server or modem and allowing it to connect to the internet. Your entire IT infrastructure relies on Cat cables, so making the right choice is crucial!


Cat5 cabling used to be the highest standard for Ethernet cabling and has been since 1995. Most businesses have Cat5 cables installed, and chances are that the PC you’re currently using is connected using a Cat5 cable. There is nothing wrong with this, as Cat5 cables can cope relatively well with current levels of bandwidth and data transfer.

However, as bandwidth technology has advanced, Cat5 installation has become obsolete. 

While Cat5, or it’s sub-variety, Cat5E, are perfectly capable of performing well for data transfer requirements, businesses who are installing entirely new networks are advised to choose Cat6 cabling. 

The reason behind this is that Cat6 cabling has a much faster bandwidth capability, making it possible to transfer significantly higher levels of data. 

While Cat5 and Cat6 cables have a similar construction of tightly wound copper wiring, Cat6 cables also feature a nylon spline, to reduce ‘crosstalk’ or signal interference.


Cat6 installations cost around 10-20% more than Cat5. While this may seem like a steep increase, you’re paying for higher quality wires. 

Not only are the performance specifications impressive, but as higher bandwidth use becomes more widespread, every business will require Cat6 in order to stay ahead, making Cat6 installation a way to future-proof your business. 

And yet, even though Cat5 is an outdated form of cabling, it can still handle adequate internet speeds for a low cost. 

If you are a smaller business, with a minimal need for transfer speeds, there is no necessity to opt for Cat6. It is also easy to upgrade your cabling from Cat5, to Cat5E (the ‘e’ stands for enhanced), so if you are looking for a little boost, the Cat5E is the perfect alternative. 

It is less expensive and adequately capable depending on your required internet speed. Cat5E also features backwards compatibility, making the overall transition to upgrading your cabling easier.

The defining differences between the two types of cable are their data transfer capabilities. 

Overall, the choice of Cat5 or Cat6 depends on the unique requirements of your business and your budget.


Generally speaking, most businesses will need to upgrade to Cat6 cables (or faster) in the coming years. You’ll likely have to upgrade to Cat6 soon, so we highly recommend opting for them now. Despite their higher initial cost, it’ll be more expensive to have all of your Ethernet cables replaced in a few years’ time, so it makes sense to upgrade once to Cat6. 

If you’re a business that uses anything, from a VOIP telephone system to a POE (power over Ethernet) device, Cat6 cables are required to handle the data needed to operate them. 

Cat6 cabling is suitable for any business with a computer network that reaches a GB or one GBPS of data transfer.


At Whitestar Solutions, we believe in providing honest advice and recommendations for all of our clients.

Rely on our data cabling installation experts to provide tailored data cabling solutions for your business, from Cat5 & Cat6 installations through to fibre optics and structured cabling systems; whatever you need, we’re here to advise on, and handle, it all.  

For more information on our services, or advice on your business’ data cabling needs, don’t hesitate to get in touch with one of our installation experts today.

UK Network Structured Data Cabling Standards Explained 2022

UK Network Structured Data Cabling Standards Explained 2022 Low-quality cabling systems – the bane of many a network administrator across the world. But can the way your cables are fitted really have a profound impact on the performance of your network? In short – yes, it absolutely can!  Structured cabling is a godsend for any network, especially one that’s likely to be expanded in the future. As a result, it’s important that there are a set of standards that govern how exactly network cabling should be carried out. WHAT IS STRUCTURED CABLING? There’s a whole host of issues that could cause network downtime, but one of the predominant causes of network problems are poorly structured cables. By adhering to high network cabling standards, structured cabling systems are able to build complex systems of network cables that are logically formed, easy to adapt and outperform unstructured networks. Your structured cabling system controls all data traffic, be it video, voice, large files and much more; it’s important to get it right! WHAT ARE THE STRUCTURED CABLING STANDARDS? The structured cabling standards are a set of rules that specialists should follow throughout the cable layout and physical installation process of any network cabling. The main network cabling standards are:   Since 1991, the Telecommunications Industry Association (TIA) established the 568 standards for structured cabling. This has been regularly revised to keep up with the advent of new technologies (such as fibre-optic cabling). The ANSI/TIA-568 standards cover the performance and compatibility of all manners of wiring and cabling. Oftentimes, commercial buildings and campuses will be built piecemeal. Structured cabling standards are designed in order to keep everything consistent, even if they’re installed years apart, the cable installation standards make it so that everything remains compatible and functional well into the future.   The ISO/IEC 11801-1:2017 standard is an international standard that was designed to govern international cabling manufacturers, vendors and companies. Its purpose is to ensure that products are up to the highest standards (the specification). Without these cabling standards, wiring and cables would vary wildly in quality, build and more. It would be almost impossible to guarantee that the wires you were working with were compatible with ones already installed. Naturally, this would result in all sorts of technical failures, and other horrible malfunctions that don’t bear thinking about. These network cable standards ensure that the cabling that is used for your system are of the highest quality and are compatible with the widest range of hardware possible.   Developed by CENELEC, the EN 50600-2-4 is a series of European standards that covers data centre infrastructure and facilities, as well as telecommunication cabling infrastructure. It defines requirements for cabling infrastructure pathways and architecture, but it doesn’t specify requirements for structured cabling types.   The second European standard serves to specify generic cabling that supports a wide range of communications services, covering balanced cabling and optical fibre cabling. WHAT ARE THE BENEFITS OF NETWORK STRUCTURED CABLING STANDARDS? Data cable installation standards are designed to keep everything on a level playing field, to keep network cabling systems safe, and to ensure that courses and education are consistent across the board. Imagine the chaos where every network uses a different style of cable, there’s no standardised methodology for structured cabling, and every Tom, Dick and Harry do their own thing. By adhering to these standards, good network installation specialists are able to maintain the highest quality of network for businesses of all sizes. NETWORK DATA CABLING TO STANDARDS WITH WHITESTAR SOLUTIONS At Whitestar Solutions, we work closely with our clients to ensure that we have a comprehensive understanding of your business before any work gets done. Our UK-wide engineers specialise in data cabling, and are on hand ready to design, install, certify and manage fibre optic, RF and structured cabling systems. With years of experience under our belt, no structured cabling job is too difficult. We work with organisations ranging from schools to hospitals, and everything in between, so get in touch with us today to talk with one of our specialists about your unique needs. We’re happy to answer any questions you might have, or to advise you on the next steps that you need to take. The key types of electrical testing to ensure your installations are compliant The key types of electrical testing to ensure your installations are compliant Compliance – not everyone’s favourite topic, but an important one, nonetheless. There’s a lot of complicated legislation, regulations and standards that your electrical system needs to adhere to, most of which you don’t need to know the ins and outs of. In this article, we break down what you need to know about electrical compliance – what it is and why it’s so important for your organisation. WHAT IS ELECTRICAL COMPLIANCE? Electrical testing and inspection compliance is the process by which a qualified engineer conducts a thorough check of your electrical systems to confirm that all installations inside a building meet legislative standards. This covers circuits, appliances and all the other good stuff. According to the Electricity at Work Regulations 1989, all electrical installations and equipment (including portable equipment), need to be maintained. It’s important that organisations ensure that both new and old electrical installations are certified as safe and compliant with BS 7671:2018. Our team at Whitestar put the utmost care into each and every system we work on, keeping the safety of our clients at the forefront of our minds at all times. Employers are required to ensure that any wiring and electrical equipment is checked regularly by a qualified commercial electrical engineer. This is best achieved through regular visual testing (to identify any obvious flaws in the system), and more detailed tests (these can be done slightly less regularly).  Electrical compliance can be complicated, so if you’re ever unsure whether you’re compliant or not, don’t hesitate to get in touch with our electrical experts who can advise further – don’t leave it to chance; failure to comply can result in hefty
customer service data

Why customer service is key in today’s day and age

Why customer service is key in today’s day and age Any business worth its sale knows the importance of providing a quality customer experience. And the best way to achieve that? Providing great customer service. Actually, not just great customer service. Exceptional customer service. Happy customers mean loyal customers. The better their experience working with a company, the more likely they are to come back. Anything less than amazing customer service and businesses risk losing customers forever. MAKING THE BEST IMPRESSION It’s more than just meeting the needs and expectations of customers – businesses need to exceed them. First impressions matter. But so too do second, third, fourth and fifth impressions. In fact, every customer service interaction is key to future success (and sales). The stats prove it: according to research, 96% of consumers say that customer service is an important factor when choosing a brand. And as for those all-important sales: even just a 5% rise in customer retention can boost company revenue by 25% to 95%. Arguably, customer service matters even more in difficult times. During the Covid-19 pandemic, for example, businesses able to give customers the care they deserved also offered them much-needed stability, convenience and value. GREAT CUSTOMER SERVICE, GREAT CUSTOMER SOLUTIONS Of course, knowing that customer service is important is the easy part. Start implementing it into your business and you’ve got your work cut out. At Whitestar, we go out of our way to ensure that we offer exceptional customer service to all our customers. We aim to exceed customer expectations and do that in a number of ways… Dedicated team of contractors Firstly, we approach people as people, not just another job. When it comes to assigning teams, we match them to a particular client. That means however many jobs you need completed over a period of time, you’ll be dealing with the same people from Whitestar. No stream of contractors coming through your doors. Just one team of experts with an in-depth knowledge of the site they are working on – and more importantly an understanding of you, the people they are working with. From a purely practical point of view, this allows our teams of contractors to get on with the job faster and more efficiently, because there’s no need for briefings or client details for each job. While from a customer service point of view, this helps build trust and reliability between us and our clients. No subcontracting We know the score. As soon as you hear the word ‘contractor’, you automatically start wondering whether that also means subcontractors. At Whitestar, we can say: absolutely not. We never subcontract any jobs. It’s just not how we roll. Your team of Whitestar contractors are just that – Whitestar employees who are committed to delivering comprehensive, top quality solutions. Being a subcontractor-free zone makes life simpler. We understand what you need and you know the work is going to be tailored to your business and easily scalable for future business growth. Our customer service promise At Whitestar, we pride ourselves on our work ethic, track record and quality of service. Our six core values – respect, honesty, commitment, teamwork, empathy and integrity – help us deliver the level of customer service you expect from an infrastructure service provider. We value each and every business we work with. From simple cabling projects to complete building refits, we always work to the highest industry standards and take a customer-centric approach to each job. Our focus is on solving problems, not creating new ones. We work hard to understand the challenges you face, and create bespoke solutions to help you overcome them. That’s our promise to you. WHITESTAR SOLUTIONS: YOUR STRATEGIC PARTNER At Whitestar, our customer service is focused on building strong relationships with our customers and crafting tailored solutions and experiences. We never under-estimate the power of positive impressions, and are confident we can give you the level of service you and your business deserve. Hoare Laboratory Whitestar provide electrical and data cabling solutions to Hoare Laboratories, a long-established family firm who are specialists in laboratory products and services. 4 Business Benefits of Installing Electric Vehicle Charging Points 4 Business Benefits of Installing Electric Vehicle Charging Points Now, more than ever, people are aware of making eco-conscious consumer choices. This includes the materials and technologies they use, as well as the businesses they support.  For this reason, we’ve seen a growing number of electric vehicles (EVs) on UK roads, a trend we expect to see continue well into the future.  As of April 2022, there are 858,000 plug-in cars in use, a 92% increase since 2020. Couple this with the government’s recent announcement that they intend to accelerate EV infrastructure, making the installation of charging points for all new homes, offices, and supermarkets mandatory by 2030, it’s no wonder that business owners are weighing up the advantages of early installation.  There are currently more than 42,000 public charging points in the UK, and this is predicted to rise to 145,000 following the government’s announcement. Electric vehicles are not a trend, they are part of a communal shift and with the government making their ambitions clear, adapting your premises to support EV infrastructure is becoming essential when looking to ensure the longevity of your business.  In this article, we’ll run through the business benefits of having electric vehicle charging points installed on your premises.  A charging point is a unit capable of charging the battery of plug-in electric vehicles.  Currently, an EV can travel roughly 300 miles before its battery needs recharging. On average, and depending on the speed the driver is travelling at, the battery of an EV holds up to 4-5 hours of charge.  Roadside EV recovery is not a simple matter. Electric cars that have ‘broken down’ due to flat batteries cannot be towed or pushed, they must be charged.  Breakdown cover companies such as the RAC and Green Flag do offer flat battery charging, but the miles are limited and will only get

7 Benefits of Structured Cabling

7 Benefits of Structured Cabling We’ve all seen a desk with cables dangling haphazardly from the back, or an office with network cables that are way too long looping out from the walls (or even running across the room!). If that’s you, then it might be time to consider some of the benefits of structured cabling. In this blog post, we’ll be running through the top 7 benefits of good, structured data cabling, and why our team at Whitestar Solutions are passionate about ensuring efficiency every time we implement a new data cabling system. WHAT IS STRUCTURED CABLING? Structured cabling is the act of logically arranging your cables to ensure proper functionality. Good data cable installation keeps everything organised and running smoothly by creating patch panels and multi-port trunks that logically route each cable to where they need to be.   Your organisation’s network infrastructure works almost like its nervous system, passing messages back and forth between your team, with each data cable acting like individual nerves. Poorly structured cables can be a nightmare to manage, and can cost your business more than you’d expect. That’s why we put together this introduction to structured cabling, helping you to understand exactly what the advantages of a structured cabling system are, and the basic principles of the process. 1. SAVE MONEY Inefficient cabling will prove costly in the long run, for several reasons: Disorganised cabling usually means installing cables that are longer than necessary. Longer cables are, generally, more expensive. When you scale that up, the costs can pile on. Whenever you hold routine network maintenance, it’s much harder for engineers to do their job when working with untidy cabling. Well structured cables will expedite the maintenance process, saving you from hefty fees. A highly flexible, well-planned cabling system will reduce power consumption, as fewer wires are required to perform critical tasks. So, is it worth the investment? Absolutely! You don’t have to pay a premium to get your network installed correctly, so make sure you’re working with data cabling professionals who will nail your cabling and save you money. 2. PLAN FOR THE FUTURE Holding a Teams meeting where people are dropping out or the connection is slow isn’t fun at all. One of the main advantages of a commercial data cabling system is that you’ll see higher bandwidth than before, with more efficient usage of network cables resulting in better connections and a reduced chance of issues. As businesses become more reliant on their network infrastructure, having this reliability will become paramount. 3. SIMPLIFY YOUR SPACE A nice, organised cabling system will simplify many aspects of your day-to-day. In your average office, many devices will be interconnected. Many devices = lots of opportunities for something to go wrong. With a simplified cabling system, it’s far easier to identify any anomalies and to fix problems as soon as they arise. 4. HEALTH & SAFETY While this shouldn’t be an issue for most offices, we’ve definitely seen some health and safety nightmares in our time! Loose wires are a trip hazard, and tripping over cables can also result in expensive monitors, computers and more tumbling down from a desk. 5. IMPROVED SCALABILITY Your network should be able to grow alongside your business. A well-structured network will enable this growth by being far, far easier to adjust and expand. Any infrastructure changes will be faster to implement (or deconstruct). If you’re planning a move to a new office space, then you’ll be glad to have properly structured wires that can be moved without too much hassle. 6. LESS CHANCE OF DOWNTIME One of the main causes of network downtime? Human error. Organised cables are usually obscured behind panelling, meaning that there’s far less chance of someone accidentally tampering with critical cabling. 7. LOOKS GREAT! Last, but by no means least, good cabling looks superb! A structured cabling system will be an aesthetic improvement every time. As changes made are less likely to deteriorate, your attractive cabling will stay in place indefinitely, meaning that it always looks its best. STRUCTURED DATA CABLING SUPPORT WITH WHITESTAR SOLUTIONS At Whitestar Solutions, we work closely with our clients to ensure that we have a comprehensive understanding of your business before any work gets done. Our UK-wide engineers specialise in commercial data cabling services, and are on hand ready to design, install, certify and manage fibre optic, RF and other structured telephone and data cabling systems.  With years of experience under our belt, no data cabling installation job is too difficult. We work with organisations ranging from schools to hospitals, so get in touch with us today to talk with one of our specialists about your unique needs. We’re happy to answer any questions you might have, or to advise you on the next steps that you need to take. Whitestar’s values: Our promise to you Whitestar’s values: Our promise to you There are lots of buzzwords in business. ‘Core values’ are not among them. Company values matter. They support an organisation’s purpose, enforce its culture, and encourage positive employee behaviours. This sense of purpose is key to business success. Corporate core values impact not just the internal workings of an organisation, but also how it interacts with its clients, stakeholders and the world around it. According to research, 73% of purpose-oriented people are satisfied with their jobs, compared to 64% of those who are not purpose-oriented. In terms of the bottom line, the same study found that 58% of companies with a clear purpose experienced growth of more than 10%, compared to 42% of companies without one. In short, strong company values help a business grow, thrive and be a success. OUR CORE VALUES To the untrained eye, Whitestar might seem like any other electrical installation company. But look a little closer and it’s clear we’re much more than that. We continually work to be the most ethical, trustworthy business partner to our clients and pride ourselves on our strong work ethic. Central to our purpose are our core
construction regulations

What is Construction Products Regulation and what does it mean for your network?

What is Construction Products Regulation and what does it mean for your network? When Construction Products Regulation, or CPR for short, was introduced in 2017, it was considered the biggest change for the cabling industry in decades. What is it all about and why should you care?  CPR ‘lays down harmonised rules for the marketing of construction products in the EU’. What that means in layman’s terms is that all cables used in permanent installations within buildings must come with a fire rating in accordance with the CPR’s classification system. It means that when you’re deciding which cables to install, as part of boosting your IT infrastructure, you can make informed decisions according to the environment as well as the level of risk. The safer the cabling, the safer the environment. WHAT ARE THE DIFFERENT SAFETY GROUPS? The regulation classifies products into one of seven classes known as ‘Euroclasses’. These are:     Aca: Does not contribute to the fire    B1ca: Minimum contribution to the fire    B2ca: Combustible, low flame spread & heat release contribution to the fire    Cca: Combustible, moderate flame spread and heat release    Dca: Combustible, moderate flame spread and high levels of heat generated    Eca: Combustible, limited fire spread of less than 425mm    Fca: Combustible, fire spread of more than 425mm Euroclasses B to D will also be classified according to smoke production (classified as s1 to s3), flaming droplets (d0 to d2), and smoke acidity (a1 to a3). That’s why you might see a classification like Cca s1b d2 a2. Manufacturers are required to send their cables off to be tested by an authorised test house, known as a Notified Body. Once the tests have been made, the cable will be given a Declaration of Performance, which is the official certificate showing how it was classified. At Euroclasses Cca and above, the factories manufacturing the cable will be regularly audited and cables retested by an approved third party. It is unlikely that many cables will adhere to Class B1ca and Aca requirements, simply because of the materials used in their manufacture. DO NETWORK CABLES NEED TO CONFORM WITH THE CPR? In short, yes. No network cable can be placed on the market for permanent installation inside buildings without first being tested and given a Euroclass rating. As per British Standard BS6701:2016+A1:2017, all network cabling used in new installations or for the refurbishment or extension of existing data cable networks within the external fire barrier of a building shall, as a minimum, meet the CPR compliance requirements of Euroclass Cca s1b d2 a2. Due to the construction of data network cables, and the way they are routed, fire can rapidly spread through a building should a cable alight. Given the growing bandwidth demands – with a large number of devices now being networked in the case of most systems – it’s crucial that cabling is manufactured to minimum standards. Now, you can assess what cabling you might need in line with your networking demands, and minimise the fire hazard. At least, in theory… WHAT DO I NEED TO DO? Attempting to understand what exactly it is that you need when expanding your IT infrastructure can be difficult. That’s where Whitestar Solutions comes in. Initially, we’ll come and carry out a commitment-free site survey. By visiting the site, we can work out your exact requirements and help you understand your safety risk. From there, we’ll provide you with a number of options – explaining how each one fits in with the CPR – so you can make those informed decisions which will impact you and those people who work in the building. Whatever option you go with, you can rest assured that our in-house qualified network infrastructure design will create a system to keep your company’s network safe and secure. To find out how Whitestar can improve your data cabling infrastructure in line with the CPR, get in touch with our team today. Is It Worth Investing In Electrical Vehicle Charging Point Installation Services For Your Business? Is It Worth Investing In Electrical Vehicle Charging Point Installation Services For Your Business? EV or hybrid vehicles are regarded by many as the future of motoring. An increasing number of people are choosing to buy new electric cars – over two million electric vehicles are now being driven around the world – and approximately 14,000 charging stations are in the UK alone. Clearly, it is not a fleeting trend and business’s that want to adapt to this and stay one step ahead of their competitors should be considering the installation of EV charging point stations on their premises. ENVIRONMENTALLY SOUND BUSINESSES ARE THE FUTURE Awareness of the devastating environmental impact of diesel and petrol vehicles has finally hit the mainstream. Electric vehicles are the future and for savvy companies, the benefits of adopting the facilities of the new technology are plain. MAKING YOUR BUSINESS MORE ATTRACTIVE TO CONSUMERS As well as reflecting your company’s core values as an environmentally friendly business, the improved service offering of EV charging stations will appeal to your consumer. As the electric vehicle industry continues to burgeon, the impetus to provide your customers with added services so that they are more likely to choose you over your competitor is vital in these times. Offering EV charging solutions increases customers “dwell time” and subsequent spending, simultaneously meeting their demands of EV drivers arriving at their destinations. If your business is the type of company that stands to benefit from an increase in footfall, investing in electrical charging point stations is worth it to upgrade amenities and future-proof your premises. MAKING YOUR BUSINESS MORE ATTRACTIVE TO EMPLOYEES AND CLIENTS Attracting and keeping the right employees is also vital for your business. Employers must start to think seriously about supporting those that are choosing EV. Your staff will enjoy instant peace of mind as they will no longer have to worry about finding the nearest charging station or the worst-case scenario of their

Hertfordshire Police

A comprehensive site survey conducted by Whitestar in preparation for redevelopment at Hertfordshire Police HQ.
bespoke CCTV solutions

Why bespoke business CCTV systems can enhance your business

Why Bespoke Business CCTV Systems Can Enhance Your Business At Whitestar Solutions, we believe that bespoke business CCTV systems are an effective way of harnessing information to drive your company forward and provide an enhanced service to clients. A bespoke CCTV system can benefit and enhance your business in multiple ways – it’s not just about keeping assets safe. Let’s take a closer look at how CCTV security systems for business use automated data capture to provide valuable data insights. You may already use business CCTV security systems to safeguard your company. Still, there are several key areas that a surveillance system can be utilised to help business performance over time. REDUCING WASTE AND MAINTENANCE COSTS You may be astonished to learn how many resources and materials are wasted in your company each day. A fully integrated remotely controlled system can be used to reduce energy consumption by impressive amounts saving you money. Whitestar Solutions offers bespoke systems that could reduce energy consumption by up to 76% and maintenance costs by up to 67%. Depending on the nature of your business, a bespoke Whitestar Solution is always a possibility. Landfill sites, for example, are now increasingly using bespoke business CCTV systems as a way of improving logistics and reducing error with complex vehicle registration recognition processes. Use an innovative solution to seize back control, save time and costs – more critical than ever in these challenging economic times. KEEPING A CLOSE EYE ON STOCK LEVELS Focussing CCTV cameras on warehouse storage areas or retail display shelves can offer a real-time remote view of re-stocking requirements or shortages wherever you are, even if you are away from the workplace. Visual markers on boxes enable cameras to record and store extremely detailed data about stock levels. You can then send this data to software platforms that can be programmed to inform the purchasing team, or automatically trigger the re-ordering of low stock goods. LEARNING ABOUT CONSUMER BEHAVIOUR PATTERNS Bespoke business CCTV systems are increasingly being used in shops for many reasons apart from security. CCTV footage that offers facial recognition, for example, can be used to track where customers head to when in a retail environment, which has the potential to improve store layout. It is possible, for example, to use data to quickly identify high-spending clients so they can be offered preferential treatment such as tailored offers within the store or excellent customer service. A ceiling camera could be used to track the footfall of shoppers across a shop floor, providing valuable insights into how well people respond to shop layouts or promotional signage. KEEPING YOUR TEAM SAFE CCTV not only helps to protect your corporate assets but more importantly, it can help to safeguard the well-being of your staff; the most essential part of your company. OPTIMISING EFFICIENCY Everyone wants to ensure consistent quality, output and performance are maintained at all costs. However, if there is a slowdown or a quality control issue, CCTV security systems for business can help leaders and managers to quickly identify and areas of weakness and address them appropriately and promptly. ENHANCED SECURITY Business security is often seen as an unnecessary expense and eventually implemented as a reactionary measure in response to a crime, rather than installed in a pre-emptive and planned manner. Unfortunately, this can be hugely problematic for many businesses. Burglaries and the theft of sensitive documents can spell ruin for a fledgeling company. Implementing security measures that suit your business should always be a priority, to prevent issues, reduce their impact, and help resolve them. It may also be essential to ensure compliance with legislation, or for the terms and conditions of your insurance. From fixed CCTV cameras and Pan-Tilt-Zooms to fully integrated, remote systems, we are on hand to explain all possible options, help identify the right solution for your requirements and offer complete equipment demonstration, ensuring you understand capabilities of the product and the optimal security benefits immediately. If you need to restrict access to authorised personnel, we offer an extensive range of security solutions, from complex networks to standalone single door controllers. There is also the ability to connect more doors to your access control, as well as a replacement key system. Our solutions can be used in all buildings and organisations, large or small. Whitestar Solutions offers the flexibility of access control, with the convenience of managing security over a standard computer network. The key regulation differences between legacy buildings vs new buildings and why you should care The key regulation differences between legacy buildings vs new buildings and why you should care To rewire or not to rewire is the big question when it comes to an older – or what we refer to as ‘legacy’ – building. The short-but-inconclusive answer is: it depends. When wiring a new building – be it school block, hospital ward or office block – the process is relatively straightforward. You need to build to regulations, with cables which are up to the job and don’t pose a fire hazard. As per our blog post on the Construction Products Regulation (CPR), every power, data and telecommunication cable that is intended to be permanently installed in a construction works now must display a CE-marked label and have a Declaration of Performance (DoP) drawn up and made available. SHOULD YOU REWIRE YOUR LEGACY BUILDING? Legacy buildings aren’t subject to the CPR in the same way that new buildings are. If the cabling in the building isn’t posing any health and safety risk – and isn’t hampering operations in any way – it doesn’t have to be ripped out and rewired with CE-marked cabling. But that isn’t to say you shouldn’t do a complete rewire anyway. As we said, it depends. So, what does it depend on? If your building has undergone any recent damage, or there are lights and sockets that have ceased to function as normal, then these are signs that the building needs to be rewired. Damage to the casing of wires can be